Which IQOS would you like to learn more about ?

How to use your IQOS 3 MULTI

Follow this quick guide and get ready to use your IQOS 3 MULTI.

TURNING ON

To turn IQOS 3 MULTI on or off, press the button for 4 seconds.

BATTERY LEVEL

Check if your IQOS 3 MULTI is turned on by pressing the button for 1 second.

Lights are showing at the bottom? IQOS 3 MULTI is ready to go.

No light tells you it’s time to recharge IQOS 3 MULTI with the IQOS Power Adaptor and Cable.

HOW TO USE

To use it, rotate the IQOS 3 MULTI lid and insert the HEETS stick.

Push it gently down to the filter line and make sure you don't twist the stick. If you do, you risk breaking the blade.

Press and hold the button until you feel a vibration. The light will begin to pulse as your IQOS 3 MULTI heats up.

Your IQOS 3 MULTI will then vibrate twice and the light will turn solid white. This means you are ready to go.

When the light begins to pulse and your device vibrates twice again, that means your IQOS 3 MULTI time is almost over.

When the light fades out completely, pull the cap and remove the used stick.

When fully charged, IQOS 3 MULTI can be used for 10 consecutive experiences. 

How to charge IQOS 3 MULTI

Make sure your IQOS 3 MULTI is ready when you want to use it.

Check the battery level of your IQOS 3 MULTI by pressing the central button.

The bar lights at the bottom will show how much charge is left in your IQOS 3 MULTI.

• 4 bars show a full charge.

• No bars means it is time to plug IQOS 3 MULTI into a power outlet using the original IQOS Power Adaptor and Cable.

Check that the bar light is pulsing, since this confirms that your IQOS 3 MULTI is charging.

IQOS 3 MULTI will need to be charged after every 10 uses and takes 90 minutes for a full charge.

How to clean IQOS 3 MULTI

Cleaning your IQOS 3 MULTI is simple.

Use the IQOS Cleaning Tool and just follow these steps:

• Slide the cap from the IQOS 3 MULTI after waiting for it to cool down for at least 30 seconds since the last use.

• Tap out any loose tobacco from the IQOS 3 MULTI.

• Carefully insert the IQOS Cleaning Tool inside the IQOS 3 MULTI until the end and gently twist 2-3 times without applying any pressure. Remove the cleaning tool from the IQOS 3 MULTI and tap it once more to remove any remaining loose tobacco.

After every 20 sessions, use the IQOS Cleaning Sticks to further clean the IQOS 3 MULTI . Simply clean with them the bottom of the IQOS 3 MULTI inside, gently and without touching the blade.

Don’t forget to also clean the inside of the cap from top to bottom.

Clean your IQOS 3 MULTI every day for an optimal taste experience.