Which IQOS would you like to learn more about ?

How to use IQOS 3 DUO

Follow this quick guide and get ready to use your IQOS 3 DUO.

TURNING ON

To turn the IQOS 3 DUO Pocket Charger on or off, press the button at the top for 4 seconds.

BATTERY LEVEL

IQOS 3 DUO Holder

Tap the button and check the small status lights to see the battery level. No lights tells you it’s time to recharge the Holder.

IQOS 3 DUO Pocket Charger

Tap the button at the top to check the battery level. If the lights’ status is low, plug the charger into a power outlet using the original IQOS Power Adaptor and Cable.  

HOW TO USE

To use your IQOS 3 DUO, gently insert a HEETS stick into the Holder. Don’t twist it. If you do, you risk breaking the blade. After you’ve inserted the HEETS stick, press and hold the Holder Button. You’ll feel a vibration and the lights will pulse slowly. That means that the Holder is getting ready. When you feel two vibrations and the status light is steadily on, it means you’re good to go.

If you feel two vibrations again, your IQOS time is nearly up. Slide the IQOS 3 DUO Holder open, remove the HEETS stick, and slide it back to close the Holder. Tap the Holder Button to see the device’s status. Remember: one light means there’s one use remaining. You can use IQOS again or place the Holder back in the Pocket Charger.

While the IQOS 3 DUO Holder is in the Pocket Charger, watch the small lights on top of the Pocket Charger. When they’re blinking, it means that the Holder is charging. When both rounded lights are on, it means that the Holder is fully charged. 

How to charge IQOS 3 DUO

Make sure your IQOS 3 DUO is always ready when you want to use it.

IQOS 3 DUO HOLDER

First check the small status lights on your IQOS 3 DUO Holder to see the battery level by pressing the button. 2 lights means it is fully charged and you can use it twice. 1 light means 1 use. No lights tells you it’s time to recharge the Holder.

To recharge the Holder, insert it in the IQOS 3 DUO Pocket Charger. After inserting the Holder in the Pocket Charger, the small lights at the top of the Pocket Charger will start blinking, which means that the Holder is charging.

Once the two rounded lights stop blinking, you can take the Holder out.

IQOS 3 DUO POCKET CHARGER

Tap the IQOS 3 DUO Pocket Charger button at the top to check the battery level.

4 bars show a full charge. One bar flashing means it’s time to plug the Pocket Charger it into a power outlet using the original IQOS Power Adaptor and Cable. 

The IQOS 3 DUO Pocket Charger will need to be charged after every 20 uses and takes 2 hours for a full charge.

How to clean IQOS 3 DUO

Cleaning your IQOS 3 DUO is simple.

Use the IQOS Cleaning Tool and just follow these 3 steps:

Slide the cap from the Holder after waiting for it to cool down for at least 30 seconds since the last use.

Tap out any loose tobacco from the Holder.

Carefully insert the IQOS Cleaning Tool inside the Holder until the end and gently twist 2-3 times without applying any pressure. Remove the cleaning tool from the Holder and tap it once more to remove any remaining loose tobacco.

After every 20 sessions, use the IQOS cleaning sticks to further clean the Holder. Simply clean with them the bottom of the Holder’s inside, gently and without touching the blade.

Don’t forget to also clean the inside of the cap from top to bottom.

Clean your IQOS 3 DUO every day for an optimal taste experience.